Sound Adjustment; Using The Sound Equalization - Kenwood DDX790 Instruction Manual

Sound adjustment

Using the sound equalization

• The adjustment is memorized for each source until you adjust the sound again. If the source
is a disc, the adjustment is stored for each of the following categories.
– DVD/DVD-VR/VCD
– CD
– DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC
• You cannot adjust the sound when the unit is in standby.
Selecting a preset sound
mode
1
On <Top Menu>:
2
3
Select a sound mode.
Changes the page
Storing your own
adjustment
Customizing preset sound mode
1
Select a sound mode.
"Selecting a preset sound mode")
2
Set <SystemQ- Ex> to [OFF]
(1), then press [Tone] (2).
3
Adjust the level of each band
(1), then select the subwoofer
level * (2).
Selects the band
The adjustments are stored and <User>
is activated.
• You can also display the <Tone> screen
by pressing AUD ( for DDX790/DDX770/
DDX7070BT/DDX370/DDX3070 ) or VOL/
ATT/AUD knob ( for DDX470/DDX4070BT )
on the monitor panel.
(
*
Adjustable only when the subwoofer is activated.
( page 50)
43
English