Section 3 Disassembly Instructions - Icom IC-F43GT Service Manual

SECTION 3
•
REMOVING THE CHASSIS UNIT
1 Unscrew 1 nut A, and remove 2 knobs B,c.
2 Unscrew 2 screws D.
3 Unscrew 2 screws E.
4 Take off the chassis unit in the direction of the arrow.
5 Unplug the connector F from the chassis unit.
A
B
C
F
D
•
REMOVING THE MAIN UNIT
1 Unscrew 2 nuts G, and remove the top plate H.
2 Remove the side plate I.
3 Unscrew 6 screws J.
4 Unsolder 8 points K, and remove the shield cover.
5 Unsolder 2 points L, and take off the main unit in the
direction of the arrow.
Shied cover
K
J
L
H
G
Chassis unit
DISASSEMBLY INSTRUCTIONS
Chassis unit
E
K
J
Main unit
J
I
•
REMOVING THE PA UNIT
1 Unscrew 3 screws M.
2 Unsolder 4 points N, and take off the PA unit in the direc-
tion of the arrow.
M
N
3 - 1
N