License Plate Lamp; Lamp Assembly; Bulb Assembly - Chevrolet Equinox Owner's Manual

6. Turn the bulb socket
counterclockwise and pull it out.
7. Pull the bulb straight out of the
socket.
8. Install the new bulb.
9. Push the bulb socket in and turn
it clockwise.
10. Reverse steps 2 5 to reinstall
the lamp assembly.
1. Bulb Socket
2. Bulb

3. Lamp Assembly

To replace one of these bulbs:
1. Open the liftgate partway. See
2. Push the left end of the lamp
assembly toward the right.
3. Pull the lamp assembly down to
remove it from the liftgate.
4. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
5. Pull the bulb (2) straight out of
the bulb socket (1).
6. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install it into the lamp assembly.
7. Push the lamp assembly into the
liftgate engaging the clip side
first.
.