Table of Contents
Advertisement
1. Low Beam Headlamp
2. High Beam headlamp
3. Park/Turn Signal Lamp
4. Sidemarker Lamp
To replace:
1. Turn the tire to reach the access
port cap on front of the wheel
well cover.
2. Remove screw (1) and turn the
access port cap (2)
counterclockwise to remove.
3. If replacing the low/high
headlamp bulb, remove the dust
cover cap from the back of the
headlamp housing by turning the
cap counterclockwise.
4. Turn the bulb socket
counterclockwise to remove it
from the lamp assembly.
5. Remove the bulb from the
socket or disconnect the bulb
assembly from the harness
connector.
6. Install a new bulb.
7. Reinstall the lamp socket into
the lamp assembly by turning it
clockwise.
8. Replace the dust cover cap on
the lamp assembly.
9. Reinstall the wheel well cover
access port cap and secure by
installing the screw.
To replace one of these bulbs:
Advertisement
Table of Contents
