ASSEMBLY
•
Attach bottom shelf, oriented as shown, to left and right leg assemblies with 1/4-20x2-3/8" machine screws and 1/4-20
1 1
flange nuts. The cut out hole for the LP cylinder should be on the left side.
Brace Assembly
•
Place lower back panel between side panels as shown. Attach to left and right side panels with (4) #8x3/8" sheet metal
2
screws. Then attach to bottom shelf with (2) #8x3/8" sheet metal screws.
#8x3/8"
Sheet Metal Screws
Qty. 6
For Front Door
Left Side Panel
Left Side Panel
Bottom Shelf
Lower Back Panel
Bottom Shelf
Right Side Panel
1/4-20x2-3/8"
Machine Screw
Right Side Panel
Magnet Assembly
Qty: 6
1/4-20
Flange Nut
Qty: 6
466226113 • 17