Mini Coupe Owner's Manual page 83

Hiding Check Control messages
Press the button on the turn indicator lever.
Some Check Control messages are displayed
continuously and are not cleared until the mal‐
function is eliminated. If several malfunctions
occur at once, the messages are displayed con‐
secutively.
They are marked with the symbol
shown here.
Other Check Control messages are hidden au‐
tomatically after approx. 20 seconds. However,
they are stored and can be displayed again
later.
They are marked with the symbol
shown here.
Online Edition for Part no. 01 40 2 919 017 - II/13
Displays
Viewing stored Check Control messages
The stored Check Control messages can only be
displayed while the driver's door is closed.
1. Press the button on the turn indicator lever
repeatedly until "SET/INFO" is displayed.
2. Press and hold the button until the display
changes.
3. Press the button repeatedly until the corre‐
sponding symbol and "CHECK INFO" ap‐
pear on the display.
4. Press and hold the button.
If there is no Check Control message, this is
indicated by "CHECK OK".
If a Check Control message has been
stored, the corresponding message is dis‐
played.
The text message is also displayed on the
Control Display.
5. Press the button to check for other mes‐
sages.
Controls
83