Headlamp Flasher - Mini Coupe Owner's Manual

Turn signal, high beams,

headlamp flasher

1 Turn signal
2 Switching on the high beams
3 Switching off the high beams/headlamp
flasher
Turn signal
Press the lever beyond the resistance point.
To switch off manually, press the lever to the
resistance point.
Unusually rapid flashing of the indicator lamp
indicates that a turn signal bulb has failed.
Signaling a turn briefly
Press the lever to the resistance point and hold
it there for as long as you want the turn signal
to flash.
Triple turn signal activation
Press the lever to the resistance point.
The turn signal flashes three times.
This function can be activated or deactivated:
1. "Settings"
2. "Lighting"
Online Edition for Part no. 01 40 2 919 017 - II/13
Driving
3. "Triple turn signal"
The setting is stored for the remote control cur‐
rently in use.
Washer/wiper system
Notes
Do not switch on the wipers if frozen
Do not switch on the wipers if they are
frozen onto the windshield; otherwise, the
wiper blades and the windshield wiper motor
may be damaged.◀
Do not use the wipers on a dry windshield
Do not use the wipers on a dry wind‐
shield; otherwise, the wiper blades may wear
more rapidly or become
At a glance
1 Switching on wipers
2 Switching off wipers or brief wipe
Controls
damaged.◀
67