Initialization Of F; Initializing The F; Modification Of F; F Page Table - Sony DCR-TRV5 Service Manual

1-2. INITIALIZATION OF F PAGE DATA
1. Initializing the F Page Data
Note: If the F Page data has been initialized, "Modification of F Page
Data" and the camera system adjustments need to be performed
again.
Adjusting page F
Adjusting Address 10 to FF
Initializing Method:
1) Select page: 6, address: 00, and set data: 01.
2) Select page: 6, address: 01, set data: 2D (NTSC) or data: 2F
(PAL) and press the PAUSE button of the adjustment remote
commander.
3) Select page: 6, address: 03, set data: 01, and press the PAUSE
button of the adjustment remote commander.
4) Wait for more than 2 seconds, and select page: 6, address: 02,
and check that the data is "01".
5) Perform "Modification of F Page Data".
2. Modification of F Page Data
If the F Page data has been initialized, change the data of the "Fixed
data-2" address shown in the following tables by manual input.
Modifying Method:
1) Before changing the data, select page: 6, address: 00, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the camcorder may
not operate.
3) When changing the data, press the PAUSE button of the
adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
4) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
5) After changing the data, select page: 6, address: 00, and set
data: 00.

3. F Page Table

Note: Fixed data-1 : Initialized data. (Refer to "1. Initializing the F Page
Data".)
Fixed data-2 :Modified data. (Refer to "2. Modification of F Page
Data").
Initial value
Address
NTSC PAL
00 to 0F
10
11
12
13
14
15
16
17
18
19
1A
1B
1C A9 A9
1D
1E 80 80
1F 80 80
20 B4 B4
21 55 55
22 86 86
23 7B 7B
24 4A 4A
25 15 15
26 90 90
27 19 19
28 84 84
29 13 13
2A
2B
2C 40 40
2D
2E 36 36
2F
30 3F 3F
31
32
33
34 89 89
35 59 59
36 38 38
37 41 41
38 20 20
39 00 00
3A 19 19
3B 00 00
3C 1D 1D
3D
3E
3F
40
5-5
Remark
Fixed data-1
(Initialized data)
Fixed data-2
36MHz origin osc adj.
Fixed data-1
HALL adj.
AWB standard data input
Frange back adj.
Fixed data-1
Max gain adj.
Fixed data-1
Color reproduction adj.
Fixed data-1
Color reproduction adj.
Fixed data-1
(Initialized data)
Auto white balance adj.
IRIS IN/OUT adj.
Frange back adj.
Fixed data-1
(Initialized data)