Accessory Contact Unit - Canon PowrShot G5 Service Manual

NOTE2 (Assembling)
After tightening the screw,
coat the Three bond 1401C.
(1)-3
ACC. SHOE
T
XA1-3170-407
4.0mm
METAL
M1.7

2.3.1.5 ACCESSORY CONTACT UNIT

(1) ACC. SHOE, ACC. SHOE SPRING
1. Insert a pair of tweezers under the ACC. SHOE SPRING and remove it.
CAUTION
Be careful not to damage the parts!
NOTE1 (Assembling)
Coat the Dia bond 1663G as shown in the figure.
2. Remove the four screws of T.
3. Remove the ACC. SHOE.
NOTE2 (Assembling)
Coat the Three bond 1401C as shown in the figure.
4. Remove the five solderings and remove the ACCESSORY CONTACT UNIT.
NOTE1 (Assembling)
Coat it with the Dia bond 1663G.
T
(1)-2
(1)-1
(1)-3
(1)-4
Fig. 3-23 ACCESSORY CONTACT UNIT
3-23
CHAPTER 3. REPAIR INSTRUCTION
(1)-1
ACC. SHOE SPRING
CAUTION
Be careful not to damage the parts!
ACCESSORY CONTACT UNIT
(1)-4
Soldering