Setting The Clock - Aiwa CX-JT9 Service Manual

CX-JT9
Remote control
Refer to the pages indicated in parentheses for details.

Setting the clock

Use the remote.
1 Pr ess CLOCK/TIMER/SET.
Go to step 3 when the time appears and the 'hour' flashes.
2 Press r or t repeatedly until "CLOCK
appears in the display and then press ENTER.
3 Press r or t repeatedly to set the hour
and then press ENTER.
4 Press r or t repeatedly to set the minute
and then press ENTER.
The time display stops flashing and the clock starts from
00 seconds.
•MULTI JOG is also available in place of r or t
To display the time
Press DISPLAY . The time will be displayed for 6 seconds.
Tip:
"AM 12:00" indicates midnight and " PM 12:00 " noon.
If "- -:- - " appears when the unit is turned off
There has been a power interruption. Re-set the clock.
8
Buttons with the same or similar names with the main unit
basically have the same function.
POWER
1-0/10, +10
Selects a CD track of the specified number.
The numbered buttons take on these functions below when pressed
together with SHIFT held down :
EDIT
Enters Automatic CD dubbing mode when pressed in
stop mode.
BAND
Selects Tuner function and the radio band.
TAPE A/B
Selects Tape function, and deck A or B.
SPECTRUM
Changes the spectrum analyzer display.
TUNER MODE
Switches between stereo or monaural FM reception.
KARAOKE
Selects Vocal Fader mode.
GEQ
Enters Graphic Equalizer setting mode.
TUNER MEMORY
Tuner: stores the received station in to preset.
SURROUND
Switches surround on and off.
"
.
r, t
CD: selects a track.
Tuner: selects a preset station.
BASS, MID and TREBLE: adjusts the level.
Clock and Timer: sets the time.
ALBUM M/N
Selects a previous album or a succeeding album.
PLAY MODE
CD: selects a playback mode.
Tape: selects a reverse mode
REPEAT
Enters CD repeat playback mode.
ENTER
CLOCK/TIMER/SET
Enters timer setting mode.
CLOCK/TIMER/SELECT (24, 25)
Selects timer playback, timer recording or timer off.
DISPLAY
Displays the time and the remaining time for CD.
When the unit is off, press DISPLAY to switch between
DEMO, Clock and ECO display modes.
SHIFT
Hold down when pressing a numbered button to change
its function to that printed above the number.
e.g.)
"Press SHIFT+BAND on the remote" indicates "Hold
down SHIFT and press '2' (BAND)". Doing so makes you
be able to select Tuner function and the radio band.
FUNCTION
Switches the active function among CD, TAPE, TUNER
and MD (VIDEO).
DISC SKIP
Select a disc.
c/d
CD and Tape: starts playback.
s
CD and Tape: stops playback.
f, g
CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
a
CD and Tape: pauses playback.
SLEEP
Switches the sleep-timer on/off and selects the duration.
VOLUME (+, -)
Adjusts the volume.
SOUND
Selects BASS, MID or TREBLE setting mode
CLEAR
Clears a track of the CD programed playback.