Projecting Your Computer's Screen Image From The Projector Via The Usb Cable (Usb Display) - NEC L102W User Manual

Projecting Your Computer's Screen
Image from the Projector via the USB
Cable (USB Display)
Using a commercially available USB cable (compatible with
USB 2.0 specifications) to connect the computer with the pro-
jector allows you to send your computer screen image to the
projector for displaying. Power On/Off and source selection of
the projector can be done from your computer without connect-
ing a computer cable (VGA).
Note:
• To make USB DISPLAY available on Windows XP, the Windows user account
must have "Administrator" privilege.
• USB Display will not work in standby condition.
1. Turn on the projector.
2. Press the USB-B button to display the Multimedia and select USB-
B (Connect PC) source.
3. Use the USB cable to connect the USB-B port of the projector and
the USB port (A type) of your computer.
4. Press the and
TER".
When you see a message as left; Wait at least 10 seconds. This al-
lows you to project your computer's screen image.
User Controls
button to select "DoUSB" and then press "EN-
43 ... English