Setting | Signal (Rgb) - NEC L102W User Manual

User Controls
SETTING | Signal
(RGB)
"Signal" is only

supported in
Analog VGA (RGB)
signal.
English ... 30
Phase
Synchronize the signal timing of the display with the graphic card.
If the image appears to be unstable or flickers, use this function to
correct it.
Clock
Change the display data frequency to match the frequency of
your computer's graphic card. Use this function only if the image
appears to flicker vertically.
H. Position
Press the button to move the image left.

Press the button to move the image right.

V. Position
Press the button to move the image down.

Press the button to move the image up.

Exit
Press to return to the previous menu.