Table of Contents
Advertisement
Advanced Operations (Stereo System)
Advanced Operations (Stereo System)
Integrating Your Stereo System
There are several reasons to consider hooking up your stereo system with your TV and VCR.
If your TV does not have stereo, you can get stereo quality from your VCR by hooking it to
your stereo receiver.
Even if your TV does have stereo, you can get better sound by taking advantage of your
stereo's better speakers.
You can record stereo audio on your VCR for longer play times, or use the VCR as an extra
tape deck for dubbing.
Hookup
Stereo System Hookup
To make this hookup, you need to be familiar with the options on your stereo system. Look at
the back of your receiver. Probably you have AUDIO IN and OUT jacks for a second tape
deck - labeled Tape 1 and 2, or AUX 1 and 2. Consult your stereo owner's manual for further
information.
You will need two audio cables - the kind with two color-coded plugs on each end (for left and
right audio channels). With the power off:
Connect the right (red) and left (white) AUDIO OUT on the VCR to the right and left AUDIO
IN on the stereo system.
Connect the left and right AUDIO OUT on the stereo to the right and left AUDIO IN on the
VCR.
The AUDIO IN (left) on the front of the VCR handles the left-channel or monaural sound. If
you connect an audio source only to AUDIO IN (left), both left and right hi-fi tracks will record
an audio signal as monaural.
Recording from Your Stereo System
With the hookup just shown, you can use your VCR to record a custom program of selections
from your stereo library. The videotape recording will give you excellent stereo quality and a
long-running tape. In this case no video will be recorded, so you can do the whole thing without
turning on the TV.
Assemble the selections you want to record on the stereo, and insert a blank VHS cassette
into the VCR. Be sure that HIFI is selected in the VCR SETUP screen (See page 26).
Press DISPLAY, then press 5 on the remote control to select SP or EP. The EP setting
gives you reasonable audio quality and a longer tape program.
Press AVX on the remote control to turn the LINE (L1) indicator on.
Press REC/IRT on the VCR and start the stereo system audio source (Tape, CD, etc.).
To stop recording, press STOP. To play back the recording, rewind the tape and press PLAY.
66
Advertisement
Table of Contents
