Table of Contents
Advertisement
Basic Operations (Tape Navigation)
This VCR can store about 80 programs including blanks in memory.
There may be a difference of within about three minutes between the displayed recording
time and the actual time.
The recording data may not appear even with a tape recorded by this VCR. In this case,
perform the following:
A, Rewind the tape to the beginning and press the MENU button.
B, Rewind or fast forward the tape to the section which was recorded by this VCR, then press
MENU.
Interpreting the Directory
Tape No.:
No. of Programs:
Tape Bar:
location on tape.
Recording Time:
(EP/SP) is changed during recording, the recording
mode indicator is switched to "- -" and the recording
the EP mode will be displayed.
Recording Channel/Recording Date/Recording Day of the Week/Recording Start
Time/Program Title:
title signal,these will be displayed.
If the clock has not been set, "- - / - -" "- - : - -" will be displayed.
If you use a cable box to receive programs, the VCR's output channel is always displayed
whichever channel is recorded.
When a broadcast program with a program title signal is recorded, program title appears. If
the title is too long, all the title characters may not be displayed
Operating Guide:
the
Blank:
can be
EP
Program No.:
background).
Shows the tape control number
Shows the number of recorded programs on the tape
Shows the length of a recorded program and its
Shows the actual recording time. If the tape speed
If the broadcast program does not have a program
Shows the button names and the operations that can be done when
directory is being displayed.
Shows the non-recorded section (time for which a new recording
made). Displays the time for which recording is possible in the
speed mode.
Shows the registered number of a recorded program. The selected
number is displayed, inverted (in black against a white
time in
53
Advertisement
Table of Contents
