Hitachi VT-UX717A Owner's Manual page 17

Getting Started (Hookups cont.)
When the VCR is on, its video signal can come into your TV on either channel 3 or channel 4.
You need to select the appropriate channel.
Turn on the power of both the TV and the VCR. Push the ANT. OUT button on the VCR
using the tip of a ballpoint pen, etc. Pressing the button alternates between RF-3 (channel 3)
and RF-4 (channel 4) in the VCR's display. Display the channel which is not used by a
commercial channel in your area.
Your basic hookup is now complete. When you're ready to try hooking up a second VCR or a
video camera for a complete home entertainment system, see Advanced Operations.
Now turn the TV and VCR back around facing you and begin your quick tour of the controls
(page 15).
17