Cleaning; Device Overheated; Update Firmware With Memory Card - Philips PicoPix PPX3610 User Manual

Cleaning

DANGER!
Instructions for Cleaning!
Use a soft, lint-free cloth. Never use liquid or
easily flammable cleansers (sprays, abrasives,
polishes, alcohol, etc.). Do not allow any
moisture to reach the interior of the device.
Do not spray the device with any cleaning flu-
ids.
Wipe over the surfaces gently. Be careful that
you do not scratch the surfaces.
Cleaning the Lens
Use a brush or lens cleaning paper for cleaning the lens
of the projector.
DANGER!
Do not use any Liquid Cleaning Agents
Do not use any liquid cleaning agents for
cleaning the lens, to avoid damaging the coat-
ing film on the lens.

Device Overheated

A overheat symbol appears if the device is overheated
(see also Symbols in the Statusbar, page 10). The device
behaves as follows:
1 The fan turns to maximum level.
2 At maximum level of brightness the symbol appears
in the status bar and the device turns automatically
to minimum level of brightness.
3 At minimal level of brightness the symbol shows for
three seconds in the middle of the screen. Then the
device turns off automatically.
After the device has cooled down, you can continue
playback.
37
Update Firmware with
Memory Card
Notice
Connect for the duration of the firmware
update the power adapter (see also Connect
Power Supply / Charge Battery, page 11).
1 Format the memory card in the file system FAT16 or
FAT32.
All Data will be Deleted!
This procedure erases all your data that is
stored on the memory card.
2 Save the latest firmware update file to the memory
card.
3 Insert the memory card (see also Inserting a Memory
Card, page 18) and switch the device on.
4 Use the navigation keys to select Settings.
5 Confirm with à.
6 Use ¡/¢ to select Maintenance.
7 Confirm with à.
8 Use ¡/¢ to select Firmware Update.
9 Confirm with à.
10 Use ¡/¢ to select Install.
11 Confirm with à.
12 The device turns off and on again. After around 5
minutesthe Language Selection screen appears.
The firmware update is now completed.
Inserting a Memory Card!
Never pull out the memory card while the
device is accessing it. This could cause data
to be damaged or lost.
Power!
Do nut unplug the power adapter during
the firmware update.
Notice
If an error occurs during the firmware update
process retry the procedure or contact your
dealer.
DANGER!
DANGER!
DANGER!
Philips · PPX3610