Using The "Super Index" Feature; What Is Super Index; Locating The Beginning Of A Recorded Program (Index Search) - Hitachi VT-FX6407AS Owner's Manual

USING THE "SUPER INDEX" FEATURE

Notes:
• If noise bars appear on the TV screen during the SLOW/STILL modes, turn and hold the shuttle ring in the
SLOW position, then press the TRACKING (
bars are then eliminated automatically in the STILL mode
• Since this videotape is used in T-180 and longer cassettes, do not repeatedly perform the following operations
with these tapes.
--Fast forward, rewind, slow play
--Insertion and ejection of cassettes
USING THE "SUPER INDEX" FEATURE

What is SUPER INDEX?

allows you to quickly search for a program or a scene you want to view or the
SUPER INDEX
point
from which you want to start recording on tape, with the following four functions:
INDEX SEARCH:
feature*.
Each time you press the REC button to start recording, the VCR will record an INDEX mark at the start of
recording. The INDEX feature uses this signal recorded on tapes (VISS signal) to locate the beginning of a
program you want to view.
BLANK SEARCH:
tape.
This switches fast forward or rewind to visual search so that you can search
EASY VIEW:
for a scene you want to view while scanning the pictures
You can skip unnecessary scenes during play.
SKIP PLAY:

Locating the beginning of a recorded program (INDEX SEARCH)

NOTE: This function only works with recordings that have been set up with indexing.
1 Press the - button (rewind) or the + button (forward) to begin the index search in the
or
You can locate the beginning of a recorded program, using the INDEX
You can locate the beginning of a blank (non-recorded) section on
) button on the VCR to minimize the noise bars, The noise
- 37 -