To Copy From A Camcorder - Hitachi VT-FX633A Owner's Manual

tapes.
Note: If your camcorder is not stereo (has only one audio plug), connect it into the AUDIO IN-L input on
the back of the VCR.
* It is not necassary to connect the S-VIDEO jack
Camcorder Hook-up Illustration.

To copy from a camcorder

BEFORE YOU BEGIN...
Connect the camcorder's AV output cable to the audio/video jacks on the back of your VCR.
1 Press the AVX button twice on remote control, to display L2 (line) on the TV display.
2 Press the REC, then PAUSE buttons on the VCR remote control. The VCR will go into Record/ Pause.
Remote Control Illustration.
3 Press the PLAY button on the camcorder. You will see the camcorder tape being played on the TV.
4 When you see the part of the Camcorder tape you wish to copy, press the PAUSE button again to
release pause and start copying the camcorder tape.
63