What’s In The Box; Television Requirements; Home Network Requirements - Sonos Playbar Product Manual

SONOS PLAYBAR®
Flood any room with epic, full-theater HiFi sound and wirelessly stream all the music on earth through one easy-to-use
player.
• Sophisticated 9-speaker design
• Connects to your TV using a single optical cable and plays everything that's connected to the TV, including cable boxes
and game consoles
• Can be placed flat on a TV stand or mounted horizontally above or below the TV
• Compatible with Dolby® Digital and stereo
It takes just a few minutes to get your PLAYBAR up and running—turn to page 1 to get started. Once you've got it set up, you
can add additional Sonos components any time.
Note: One Sonos component must be connected to your broadband router. If the PLAYBAR
will not be located near your router, you can connect a SONOS BRIDGE™ or any Sonos player
(purchased separately) to the router instead.
What's in the Box
• SONOS PLAYBAR
• Power Cord
• 5 ft. /1.5m TOSLINK Optical Audio Cable
• Ethernet Cable
• Quick Start Guide
• Important Product Information Booklet
What's Required

Television requirements

The PLAYBAR is compatible with any television that has an optical digital audio output.

Home network requirements

Your home network must meet the following requirements:
Note: Your network must have a high-speed Internet connection, as the Sonos system is
designed to provide you with online software updates. Your Sonos system must be registered
to receive these updates, so be sure to register during the setup process. We do not share
your e-mail address with other companies.
• If your modem is not a modem/router combination and you want to take advantage of Sonos' automatic online
updates, or stream music from an Internet-based music service, you must install a router in your home network. If
you do not have a router, purchase and install one before proceeding.