Using Bravia Sync With Control For Hdmi - Sony KDL-46551 00 Operating Instrctions

Using Features
Using BRAVIA Sync with Control for HDMI
The BRAVIA Sync function allows this TV to communicate with other Sony equipment
supporting the Control for HOMI function.
To connect Sony equipment with Control for HOMI
Use an HDMI cable that bears the HDMI logo for connection. See the HDMI connection shown in
the Quick Setup Guide provided with the TV documentation.
Setting the Control for HOMI
The Control for HOMI function must be set up in order for the TV to communicate with other
Control for HOMI enabled equipment. Refer to the online Reference Book for information on
how to set up this TV's Control for HOMI function. For other equipment, refer to its operating
instructions.
Available options using Control for HOMI
The following operations are available after you connect the supported Sony equipment with
Control for HOMI function to your TV:
• Automatically turn off the connected equipment when you turn off the TV.
• The TV will automatically turn on and select the respective HDMI input.
• The connected equipment is turned on by One-Touch-Play.
• Possible operations with BRAVIA Sync buttons, see page 13.
• Equipment listed under
External Inputs
will turn on automatically when selected.
When a Sony NV receiver with BRAVIA Sync is connected, the following additional operations
are possible:
• Turning on the NV receiver when the TV is turned on.
• Adjusting the volume and muting of the NV receiver with the TV's remote control.
• Pressing
TC==t
on the remote control turns on and searches for an external audio system that
supports BRAVIA Sync. When the BRAVIA Sync audio system is on, the internal speakers of the
TV will turn off and the Picture Mode will change automatically to Cinema.
• When using BRAVIA Sync, the included remote control will change some of the buttons
functions to accommodate control over the device. If the device does not support this feature,
some buttons will remain without function.
16