Hitachi CPX960WE User Manual page 7

• When the projector is not to be used
for an extended period.
For safety purposes when the
projector is not to be used for an
extended period because of travel,
etc., always disconnect the power
Disconnect the
plug from the
plug from the power outlet. Also power outlet.
close the lens cover to prevent the lens
surface being scratched.
• Moving the projector.
® When moving the projector, be sure _1_
to close the lens cover, disconnect
the power plug from the power outlet
and disconnect all external
Disconnect the
plug from the
connections. Failure to do this power outlet.
could damage the power cord
and cause fire or electrical shock.
Avoid any impact or shock to the projector
because this could result in malfunction.
® When moving this projector outdoors, protect
it from wetting due to rain, etc. If the
projector should become wet, dry it
thoroughly before further use. I_1._
Continued use while wet could
result in fire or electrical shock.
/
[General Cautions]
• Avoid excessively hot locations.
Do not place this projector in direct
sunlight or near a hot object such as a
stove, etc., because the heat could
t.y
have adverse influence on the cabinet
and other parts.
• Sound volume.
Set the volume at a suitable level to avoid
bothering other people. It is also better to keep
the volume level low and close the windows at
night to protect the neighborhood environment.
•
Lens care
Use commercially available lens
tissue to clean the lens (used to clean
cameras, eyeglasses, etc.). Be careful
not to scratch the lens with hard
objects.
®
• Cabinet care.
® The cabinet is made of plastic and discoloration
or paint peeling can occur if wiped with a solvent
such as benzine, thinner, etc.
® Before using chemical wipes, be sure to read
and observe the instructions.
® Do not spray volatile substances such as
insect repellent on the cabinet. Also, do not
allow long-term close contact with rubber or
vinyl products because this could result in
discoloration, peeling paint, etc.
® Use a soft cloth to clean the cabinet and
operation panel. When excessively soiled,
dilute a neutral detergent in water, wet and
wring out the cloth and afterward wipe with a
dry cloth. Do not apply undiluted detergent
directly to the projector.
• Extended usage.
When using this projector for an extended
period, stop periodically to rest the eyes to
prevent eye fatigue.