Other Set - Samsung SCZ-3250PD User Manual

OTHER SET

You can reset the system by running FACTORY DEFAULTS, or set the font color etc.
lANGUAGe
Select <LANGUAGE> and use the left/right
button to select a preferred display language.
1. Select <MAIN MENU>-<OTHER SET>.
2. Select each item and set appropriately.
EXTERNAL TRG
Set the EXTERNAL TRG menu to ON and
press the SETUP switch to display the
appropriate screen.
You can set the STILL TIME to 0~4 seconds.
If DELAY TIME is set to FIX, the DELAY TIME
will be set in sync with the STILL TIME; if set
to USER, the DELAY TIME will be set to your
setting.

M
If VPS is set to OFF, the EXTERNAL
TRG
FACTORY DEFAULTS
When selected, the <FACTORY DEFAULTS>
screen appears and you can reset all settings to
the factory default settings by selecting the <OK>.
However, the protocol, baud rate, address and the
language settings will not be reset.
M 
Note that the resetting the system to the
factory default will erase all settings data.
OSD COLOR
Selects the color of the on-screen display font.
menu will be deactivated.
OTHER SET
LANGUAGE
EXTERNAL TRG EXTERNAL TRG
FACTORY DEFAULTS FACTORY DEFAULTS
OSD COLOR OSD COLOR
CTRL TYPE CTRL TYPE
EXTERNAL TRG EXTERNAL TRG
STILL TIME STILL TIME
DELAY TIME DELAY TIME
FACTORY DEFAULTS FACTORY DEFAULTS
OK
ENGLISH
(OFF)--- (OFF)---
BW BW
A A
OFF OFF
FIX FIX
CANCEL
English _31