Remote Oil Filter - Westerbeke 4.5KW BCGB-60HZ Operator's Manual

REMOTE OIL FILTER (OPTIONAL)
INSTALLATION
This popular accessory is used to relocate the engine's oil fil-
ter from the engine to a more convenient location such as an
engine room bulkhead.
NOTE:
Refer to ENGINE OIL CHANGE in this manual for
instructions on removing the oilfilter.
• L.
n . . . . . . . . . . . . .
CLEAN OIL TO THE O-RING WHEN
THREAO THE KIT ON. THEN HAND
TIGHTEN AN ADDITIONAl 3/4 TURN AFTER THE O-RING
CONTACTS THE BASE.
NOTE THE "IN" AND "OUT" MARKINGS
ON THE ADAPTER WHEN THE HOSES ARE
REMOVED FOR INSTAlLATION SO THEY
WILL BE RECONNECTED CORRECTlY.
To install, simply remove the engine oil filter and thread on
WESTERBEKE's remote oil filter kit as shown. Always
install this kit with the oil filter facing down as illustrated.
Contact your WESTERBEKE dealer for more information.
NOTE:
Westerbeke is not responsible for engine failure due to
incorrect installation of the Remote Oil Filter.
FASTEN SECURELY TO A BULKHEAO
(SCREWS ARE OWNER SUPPlIEO)
APPLY A THIN COAT OF CLEAN OIL TO THE FIL-
TER GASKET WHEN INSTALLING. AmR THE
FIlTER CONTACTS THE BASE, TIGHTEN IT AN
ADDITIONAl 3/4 TURN.
Engines
&
Generators
22