3D Adapter MODEL 3DA-1 OWNER’S GUIDE Features • Converts 3D video originating in several popular formats to checker- board format for display on your 3D or 3D-ready Mitsubishi television. • Processes side-by-side, top-and-bottom, and frame-packing 3D (e.g., Blu-ray 3D) formats.
FCC Information cations. However, there is no Product: 3D Adapter guarantee that interference will not Model: 3DA-1 occur in a particular installation. If this equipment does cause Responsible Mitsubishi Digital harmful interference to radio or Party:...
Battery Installation The remote control requires one CR2025 lithium battery. To remove the battery, press on the retain- Emitter ing clip. Remove the cover. Insert the battery, positive side up. Be sure the retain- ing clip holds the battery securely. Reinstall the cover.
Connecting the Adapter Connecting a Single 3D Video Source • Power off all devices prior to connecting the Adapter. • If the device was in use prior to adding the Adapter, use the same TV input if possible. • On an 833 series TV, the input must be named Game.
3D Mode for side-by-side. select 3D Mode Normal. The Mitsubishi 3D Adapter, Model 3DA-1, may be used to display 3D content only when connected to a Mitsubishi 3D Ready TV or a Mitsubishi 3D TV. A 3D source device coupled with the Mitsubishi 3D Adapter is required to support display of 3D games, 3D broadcasts from terrestrial/cable/satellite and 3D Blu-ray disc content.
3D Safety Requirements • 3D Glasses are NOT designed as sunglasses or safety glasses and do not provide protection. 3D glasses should be worn only when viewing 3D material. • Do not wear the wireless glasses in any situations that require unimpaired visual perception.
Mitsubishi Model 3DA-1 3D Adapter Limited Warranty MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants as follows to the original purchaser of this 3D adapter from an authorized MITSUBISHI Audio/ Video Dealer, should the adapter prove defective by reasons arising from improper workmanship and/or material: a.