Input Menu - Hitachi CP-X1200 User Manual

Multifunctional Settings (continued)
Multifunctional Settings (continued)

INPUT Menu

With the INPUT menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
Item
Select a color space mode using the
Selecting the AUTO automatically selects the optimum mode.
COLOR SPACE
memo
signal other than a COMPONENT port input of 525i/625i/SCART RGB.
memo
select the SMPTE240 or the REC709 for a HDTV signal.
Select a function of COMPONENT port using the
COMPONENT
When the SCART RGB is selected, the COMPONENT port function as a port for
a SCART RGB signal input. Please refer to the section "Connecting Your
Devices".
Select a signal type mode using the
Selecting the AUTO automatically selects the optimum mode.
memo
VIDEO
VIDEO port. For a component video signal, the signal type is identified
automatically independently of this function.
memo
becomes unstable (ex. a irregular picture, a color lack), please select the mode
depending on the input signal.
Select the TURN ON or the TURN OFF using the
When the TURN ON is selected, the 3D-YCS mode works for a completely still
3D-YCS
image, or images with few motions.
memo
memo
INPUT menu is not effective.
Select a noise reduction level using the
The noise on screen is reduced according to the selected level.
memo
VIDEO NR
VIDEO port. At a video signal of NTSC3.58, this function performs only when
the TURN OFF is selected to the item "3D-YSC" of this INPUT menu.
memo
the picture.
AUTO RGB SMPTE240
This item can be selected only at a RGB signal or a component video
The AUTO operation may not work well at some signals. In such a case,
COMPONENT SCART RGB
AUTO NTSC PAL
This item is performs only at a video signal from the VIDEO port or the S-
The AUTO operation may not work well at some signals. If the picture
TURN ON TURN OFF
This item performs only at a video signal of NTSC3.58.
When this function performs, the setting of the item "VIDEO NR" of this
HIGH MIDDLE LOW
This item performs only at a video signal from the VIDEO port or the S-
When this adjustment is excessive, certain degradation may appear on
Description
/ buttons. :
REC709 REC601
/ buttons. :
SECAM NTSC4.43
/ buttons. :
(This table is continued to the following page.)
MENU
MAIN COLOR SPACE AUTO
PICTURE-1 COMPONENT COMPONENT
PICTURE-2
VIDEO AUTO
INPUT 3D-YCS TURN OFF
AUTO VIDEO NR LOW
SCREEN
P. INP. INPUT VIDEO
OPTION P. INP. POSIT.
NETWORK
POWERUP INPUT RGB
: SELECT
/ buttons. :
M-PAL N-PAL
/ buttons. :
27