Wiring Guide; Specifications - Samson C02 Owner's Manual

The C02 can be connected to any mixer, mixer/amplifier, or mic preamp using a
standard microphone cable. As shown in the wiring diagrams below, connect the
female XLR end directly to the C02's gold-plated connector and the other end
(normally a male XLR end, although some mixers use 1/4" connectors) to the
mixer, mixer/amplifier, or mic preamp.
C02 Specifications
Type
Polar Pattern
Frequency Response
Sensitivity
Raded Impedance
Equivalent Noise level
Max. SPL
Dynamic Range
Power Supply
Current Consumption
Dimensions
Weight
Wiring Guide and Specifications
C02 Frequency Chart
7
Condenser
Cardioid
40~20000 Hz
-40 dBV/pa (10mv/pa)
200Ω
22 dB (A weighted IEC/DIN 651)
134 dB (THD≤ 0.5% 1000 Hz)
112 dB
48V Phantom Power (IEC 268-15/DIN
45596)
3.5 mA
ø 20 x 150 mm
170g