Qkick Wiring; Specifications - Samson QKICK Owner's Manual

QKICK Wiring Guide
The QKICK can be connected to any mixer, mixer/amplifier, or mic preamp using
a standard microphone cable. As shown in the wiring diagrams below, connect
the female XLR end directly to the QKICK's gold-plated connector and the other
end (normally a male XLR end, although some mixers use 1/4" connectors) to
the mixer, mixer/amplifier, or mic preamp.
QKICK Specifications
Type
Polar Pattern
Frequency Response
Sensitivity
Raded Impedance
Max. SPL
Weight
QKICK Specifications
Dynamic Microphone
Super Cardioid
50~16000 Hz
-62 dBV/pa (0.8mv/pa)
200Ω
147 dB (THD≤ 0.5% 1000 Hz)
370g
7