Dell PowerEdge 2600 Service Manual page 55

7. Replace the ERA/O card (see
8. Replacing the cooling shroud (see
9. Replace the cooling fans (see
10. Replace the power supplies (see
11. Replace the cover (see "Replacing the
12. Replace all other cables removed when the system board was removed (intrusion alarm cable, control panel cable, IDE cable for the CD/diskette drive,
and the power and interface cables from the power distribution module).
13. Reconnect the system to its electrical outlet(s) and turn the system on, including any attached peripherals.
Back to Contents Page
"Installing a Replacement ERA/O Card").
"Replacing the Cooling Shroud").
"System Fans").
"Replacing a Power Supply").
Cover").