Types Of Effects; Types Of Scene Fx Effects - Pioneer Remix station RMX-1000 Operating Instructions Manual

Types of effects

Types of SCENE FX effects

BPF ECHO
This function superimposes the input sound that has passed through the
band pass filter onto the original input sound and passes this through
the echo circuit before outputting the sound.
The echo is output several times according to the multiplying factor of
the input sound's beat, with the delay sound gradually attenuating.
Input sound that has passed
through the band pass filter
Input sound
SCENE FX
control
SCENE FX control Sets the band pass filter's cutoff frequency.
SUB PARAMETER 1
Sets the echo sound's delay time.
control
SUB PARAMETER 2
Applies a modulation effect to the output.
control
ECHO
The echo is output several times according to the multiplying factor of
the input sound's beat, with the delay sound gradually attenuating.
1 beat
Use this to set the balance between the original sound
SCENE FX control
and the echo sound.
SUB PARAMETER 1
Sets the echo sound's delay time.
control
SUB PARAMETER 2
Sets the filter's cut-off frequency.
control
NOISE
This function passes white noise generated internally through the band
pass filter and echo before outputting it.
SCENE FX
control
Sets the cutoff frequency of the filter through which the
SCENE FX control
white noise passes.
SUB PARAMETER 1
Sets the volume of the white noise.
control
SUB PARAMETER 2
Applies a modulation effect to the white noise.
control
16
En
Frequency
Input sound turned off
Fade-out
Time
Frequency
SPIRAL UP
This function adds a reverberation effect to the input sound.
When the delay time is changed, the pitch changes simultaneously.
1 beat
SCENE FX control Sets the SPIRAL's delay time.
SUB PARAMETER 1
Sets the echo sound's delay time.
control
SUB PARAMETER 2 Sets the amount of pitch shifting by which the pitch is
control raised.
REVERB UP
This function adds a reverberation effect to the input sound.
Direct sound
Early reflected sound
Level
Reverberations
SCENE FX control Use this to set the degree of the reverb effect.
SUB PARAMETER 1
Use this to set the degree of the reverb effect.
control
SUB PARAMETER 2
Sets the cutoff frequency of the high pass filter.
control
HPF ECHO
This function passes the input sound through the high pass filter and
echo before outputting it.
The echo is output several times according to the multiplying factor of
the input sound's beat, with the delay sound gradually attenuating.
SCENE FX control Sets the cutoff frequency of the high pass filter.
SUB PARAMETER 1
Sets the echo sound's delay time.
control
SUB PARAMETER 2
Applies a modulation effect to the output.
control
LPF ECHO
This function passes the input sound through the low pass filter and
echo before outputting it.
The echo is output several times according to the multiplying factor of
the input sound's beat, with the delay sound gradually attenuating.
Input sound turned off
Fade-out
Time
Time
Frequency