Sony Cyber-shot DSC-RX10 Help Manual page 431

Help Guide
Troubleshooting
Digital Still Camera
DSC-RX10
Self-diagnosis display
If a code starting with a letter of the alphabet appears, the self-diagnosis function on this product is
working. The last two digits (indicated by □□) will differ depending on the state of this product.
If you cannot solve the problem even after trying the following corrective actions a few times, this
product may need repair. Contact your Sony dealer or local authorized Sony service facility.
C:32:□□
There is trouble with the product's hardware. Turn the power off and on again.
C:13:□□
This product cannot read or write data on the memory card. Try turning off and on this product
again, or taking out and inserting the memory card several times.
An unformatted memory card is inserted. Format the memory card.
The inserted memory card cannot be used with this product, or the data is damaged. Insert a new
memory card.
E:61:□□
E:62:□□
E:91:□□
A product malfunction has occurred. Initialize this product, then turn the power on again.
E:94:□□
There is a malfunction when writing or deleting data. Repair is required. Contact your Sony dealer
or local authorized Sony service facility. Be prepared to give all numbers in the error code beginning
from the E.
Related Topic
Format
Setting Reset
Notes on use
4 -477-079-12(1)
Copyright 2013 Sony Corporation