4-468-878-61(1)
Wi-Fi Connection/
One-touch (NFC) Guide
*
NFC: Near Field Communication
Notes
The Wi-Fi function of this camera cannot be used
connected to a public wireless LAN.
PlayMemories Mobile is not guaranteed to work on
all Smartphones and Tablets.
To use the One-touch functions (NFC) of the camera,
a smartphone or tablet computer supporting the
NFC function is required.
Detailed operations are described in the Wi-Fi
Guide.
Refer to the following website.
http://support.d-imaging.sony.co.jp/wi-fi/dsc/2013-2/
Sending images to the computer
What you can do
Note: Steps 1 and 2 are required the first time only.
1 Install the latest software on your computer.
Sending images to the computer
Windows: PlayMemories Home
http://www.sony.net/pm/
Required equipment/environment
2 Connect the camera to an access point.
The computer connected to a
wireless access point
Note: For more information, refer to the instruction of the access point, or contact the person who set up the access point.
See the description on the right.
If the wireless access point has a WPS button.
Press the MENU button.
Sending images to a smartphone
(One-touch sharing (NFC))
Select 3 with [WPS Push].
Required equipment/environment
A smartphone or a tablet computer
See the reverse side.
Push the WPS button on the wireless access point you want to
Using a smartphone as a remote
controller (One-touch remote (NFC))
Required equipment/environment
3 When your computer is not started, turn on the computer.
A smartphone or a tablet computer
See the reverse side.
4 Start sending images to the computer.
Confirm that a memory card is inserted in the
Viewing still images on a TV
Note: Previously sent images are not duplicated. Sending a movie or multiple still images takes time.
Refer to the Wi-Fi guide of the
website.
register.
Press the MENU button.
camera.
Mac: Wireless Auto Import
http://www.sony.co.jp/imsoft/Mac/
Select [Wireless Auto Import].
If you know the SSID and password of your wireless access
point.
Press the MENU button.
Select 3 with [Access point settings].
Select the access point you want to register, enter the password,
then press [OK].
Select
1 with [Send to computer].
Image saving automatically starts.