Hitachi 51S700 Operating Manual page 53

CHANNEL MANAGER
Auto Channel Scan
ANT A/ANT B
Chan. Manager
Ant A (NTSC)
Source
Antenna
Auto Channel Scan
Channel List
Move Select
SEL
Chan. Manager
Ant A (NTSC)
Auto Channel Scan
Scanning Channel Number: 66
Cancel
SEL
If the EXIT button is pressed while AUTO CHANNEL SCAN function is engaged, programming will stop. If two antenna are
connected, switch antenna inputs with the ANT button and repeat AUTO CHANNEL SCAN for the second antenna input.
Remember to select the correct ANTENNA/CABLE mode before using AUTO CHANNEL SCAN.
See CHANNEL LIST - SCAN to add or to delete additional channels (see page 55).
Press down on THUMB STICK to cancel Auto Channel Scan.
Use THUMBSTICK to highlight Clear, then press down on THUMBSTICK to clear the Channel List.
Repeat Auto Channel Scan - Start.
Press EXIT to quit menu.
This feature will automatically store active TV channels in Auto Channel Scan. This will allow you to skip
unused channels when using CHANNEL UP ( ) or DOWN ( ).
Cable(1) Cable(2)
Start
Cancel
ANT C
Chan. Manager
Ant C (DTV)
Source
Antenna Cable
Auto Channel Scan
Channel List
Move Select
SEL
Chan. Manager
Ant C (DTV)
Auto Channel Scan
Scanning Channel Number: 66
Cancel
SEL
Chan. Manager
Ant A (NTSC)
Source
Antenna Cable(1)
THUMB
STICK
Auto Channel Scan
Channel List
Move Select
SEL
THUMB
STICK
SELECT
Signal Meter
Start Clear
THUMB
STICK
SELECT
000-000
Cancel
53
Cable(2)
Start