Hitachi 51S700 Operating Manual page 27

HOW TO USE THE REMOTE TO
CONTROL YOUR TV
ASPECT button
Press this button to quickly change the picture format ASPECT ratio.
Depending on the input signal format received, the picture format ratio allows you to adjust the images through the following options.
4:3 STANDARD
4:3 EXPANDED
4:3 Zoom1/Zoom2
16:9 STANDARD
16:9 Zoom
(1) NTSC/480i/480P Input
4:3
INPUT
(2) 480i/480P Input
16:9
INPUT
(3) 720P/1080i Input
16:9
INPUT
Use this aspect mode to display conventional (4:3) images. Side panels (gray areas) are placed to the
left and right of the image to preserve the original aspect ratio of the source. Note: Use this mode for
only 15% of your total viewing time to prevent uneven aging of the phosphors. Phosphors in the lighted
area of the picture will age more rapidly than the gray areas.
Use this aspect mode to display conventional (4:3) sources by linearly increasing image expansion from
the center towards the edges of the display area in order to fill it.
Use these aspect modes to zoom in on conventional (4:3) sources.
Use this aspect mode to display 16:9 sources like HDTV and DVD's preserving the original 16:9 aspect
ratio.
Use this aspect to Zoom-in once while in 16:9 aspect.
4:3 STANDARD 4:3 EXPANDED
16:9 ZOOM 16:9 STANDARD
4:3 STANDARD 4:3 EXPANDED
16:9 ZOOM 16:9 STANDARD
16:9 STANDARD 16:9 ZOOM
4:3 ZOOM1
4:3 ZOOM2
4:3 ZOOM1
4:3 ZOOM2
NOTES: 1. The Aspect Style setting you select for an ANT input will
automatically be set for the other ANT inputs. However, all
five video inputs have independent Aspect Style settings.
2. When in ANT C, signal format is dependent on broadcaster.
27