Electrical Connection - LG WD-1439TDK series Owner's Manual

I nstallation
I Electrical connection
1
2
3
4
5
CAUTION
CAUTION concerning the Power Cord
I Washing Machine is to be connected to the water mains using new hose-sets and old hose-sets should
not be used.
I Connecting water supply hose
NOTE
After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type
of faucet for water supply. In case the faucet is square or too big, remove the spacing ring before inserting the
faucet into the adaptor.
Water supply pressure must be between 30kPa and 1000kPa
(0.3~10kgf/cm 2 )
Don't strip or crossthread when connecting Inlet hose to the valve.
If the water supply pressure is more than 1000kPa, a decompression device
should be installed.
When your washer has two valves.
7