Memory Function - Mercedes-Benz CLS Operator's Manual

Memory function

112
Press memory button M ? and one of the
X
arrows on adjustment button = within
three seconds.
The parking position is stored if the exterior
mirror does not move.
If the exterior mirror moves out of position,
X
repeat the steps.
Calling up a stored parking position
setting
Button for the driver's side exterior mirror
:
Button for the front-passenger side
;
exterior mirror
Adjustment button
=
Memory button M
?
Turn the SmartKey to position 2 in the
X
ignition lock (
Adjust the exterior mirror on the front-
X
passenger side using button ;.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
if you press button : for the exterior
R
mirror on the driver's side
page 147).
Y
Memory function
Storing settings
G WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
G
WARNING
Children could become trapped if they
activate the memory function, particularly
when unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
position of the seat, backrest and head
R
restraint
active multicontour seat: seat contour,
R
dynamic function level
driver's side: position of the exterior
R
mirrors on the driver's and front-passenger
sides