Mercedes-Benz CLS Operator's Manual page 110

Cls
Hide thumbs Also See for CLS:
Table of Contents

Advertisement

Steering wheel
108
Problems with the steering wheel heating
Problem
If the steering wheel
heating indicator lamp
is flashing, the steering
wheel heating has
switched off
automatically.
EASY-ENTRY/EXIT feature
Important safety notes
G
WARNING
When the EASY-ENTRY/EXIT feature adjusts
the steering wheel, you and other vehicle
occupants – particularly children – could
become trapped. There is a risk of injury.
While the EASY-ENTRY/EXIT feature is
making adjustments, make sure that no one
has any body parts in the sweep of the
steering wheel.
If somebody becomes trapped:
press one of the memory function position
R
buttons, or
move the switch for steering wheel
R
adjustment in the opposite direction to that
in which the steering wheel is moving.
The adjustment process is stopped.
G
WARNING
If children activate the EASY-ENTRY/EXIT
feature, they can become trapped,
particularly when unattended. There is a risk
of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
G
WARNING
If you drive off while the EASY-ENTRY/EXIT
feature is making adjustments, you could lose
Possible causes/consequences and M Solutions
The on-board voltage is too low because too many electrical
consumers are switched on.
Switch off electrical consumers that you do not need, such as
X
the rear window defroster or interior lighting.
Once the battery is sufficiently charged, the steering wheel
heating will switch back on automatically.
The EASY-ENTRY/EXIT feature makes getting
in and out of your vehicle easier.
You can activate and deactivate the EASY-
ENTRY/EXIT feature in the on-board
computer (
Position of the steering wheel when the
EASY-ENTRY/EXIT feature is active
The steering wheel swings upwards when
you:
R
R
R
i
control of the vehicle. There is a risk of an
accident.
Always wait until the adjustment process is
complete before driving off.
page 233).
Y
remove the SmartKey from the ignition lock
with KEYLESS-GO: open the driver's door;
KEYLESS-GO must be in position 1 in the
ignition lock
with the SmartKey: open the driver's
door; the SmartKey must be in position 0
or 1 in the ignition lock (
The steering wheel only moves upwards if
it has not already reached the upper end
stop.
page 147)
Y

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cls 63 amgCls 63 amg 4maticCls 550Cls 550 4matic

Table of Contents