Bluetooth ® Connection To The Media Interface Plus; Authorization - Mercedes-Benz Media Interface Plus User Manual

®
Bluetooth Connection to the
Media Interface Plus
To successfully establish a Bluetooth
connection, both the end device and the Media
Interface Plus must be switched on and
®
Bluetooth must be activated. The end device
to be connected must be located in the vehicle.
The first time you use the Media Interface Plus
with another device, the end device must initial-
ly be authorized on the Media Interface Plus.

Authorization

G
Warning!
Only authorize the end device on the Media
Interface Plus when the vehicle is at a stand-
still. Otherwise, there is a risk that you could
be distracted from the traffic situation and
cause an accident.
Note
Depending on the end device, you may need
to make corresponding settings for the
authorization and for an automatic
connection with the Media Interface Plus.
(Please refer to the operating instructions of
the respective end device.)
1. Switch on COMAND or the audio system.
(Please refer to the audio system operating
instructions.)
®
2. On COMAND or the audio system, select
Audio
Music
list
or
2. Press the Bluetooth
Interface Plus for approx. 3 seconds.
The LED on the Bluetooth
up green. The Media Interface Plus is
available for approx. 5 minutes to establish
a Bluetooth
discovered by the end device.
3. Activate the Bluetooth
end device. (Please refer to the respective
end device's operating instructions.)
4. On the end device, start the search for
other Bluetooth
the respective end device's operating
instructions.)
Available Bluetooth
are searched for and displayed.
5. Select MI plus from the list of available
devices and confirm.
6. When prompted, enter the Bluetooth
pin 62872 on the end device.
Media Interface Plus
Media Interface
Playlists Device
Add device .
®
button on the Media
®
button lights
®
connection and can be
®
function of the
®
devices. (Please refer to
®
-capable devices
®
7