Manually Disconnecting The Bluetooth ® Connection; Connecting An Ipod ® /Iphone ® To The Media Interface Plus; General Notes - Mercedes-Benz Media Interface Plus User Manual

Manually Disconnecting the Bluetooth
Connection
®
The Bluetooth connection between the end
device and the Media Interface Plus can be
disconnected manually on the end device.
(Please refer to the operating instructions of the
end device.)
Or:
1. On COMAND or the audio system, select
Audio Media Interface
Music Playlists
list.
2. Select the currently connected end device
from the list and confirm with OK.
®
The Bluetooth connection between the
Media Interface Plus and end device is
disconnected.
®
Connecting an iPod
Media Interface Plus
G
Warning!
Only connect the iPod
vehicle is at a standstill. Otherwise, there is a
risk that you could be distracted from the
traffic situation and cause an accident.

General Notes

Device
It is recommended that you install the latest
software version on the iPod
®
the iPod
If headphones are plugged into the iPod
®
iPhone
the vehicle loudspeakers. Therefore, the head-
phones should be disconnected from the
®
iPod /iPhone
The use of iTunes
optimum sound quality and avoid fluctuations in
the playback volume. Assign the "Equalizer
Pop" setting to the files on the iPod
refer to the iPod
detailed information.)
The battery of the connected iPod
charged by the Media Interface Plus as soon as
COMAND or the audio system is switched on.
Media Interface Plus
®
/iPhone
®
/iPhone
®
. (Please refer to
User's Guide.)
, the audio will not be played back over
®
.
®
is recommended to ensure
®
User's Guide for more
®
to the
®
when the
®
/
®
. (Please
® ®
/iPhone is
9