Miele H 5247 BP Operating And Installation Instructions page 64

Cleaning and care
Starting a pyrolytic process
^ Take all accessories out of the oven.
^ Select the Pyrolytic ^ function.
Py I
PY I will appear in the display. The
number will start flashing.
Use the V or W sensor to scoll between
PY I, 2 and 3.
^ Start the pyrolytic process required.
^ Touch the OK sensor.
Pyrolytic cleaning will commence.
Py I
Œ
The door will lock. The
shows that the door lock has been
activated. The oven heating will switch
on.
64
The duration of the cleaning
programme can be seen in the display
when triangle V is below the
symbol.
You can set a finish time for the
pyrolytic process during the first five
minutes after starting the programme,
for example, to take advantage of
cheaper night electricity tarifs. To do
this:
^ Call up the
You can change the finish time if you
wish at any time up until the
programme starts.
symbol
At the end of pyrolytic cleaning
process
– PYE will appear in the display.
– the
– a buzzer will sound, if the buzzer is
^ Turn the function selector to "0".
The buzzer will stop and the symbols in
the display will go out.
I:53
m
V
(Finish) symbol and
use the W sensor to change the finish
time.
symbol will start flashing.
switched on, see "Settings
P : 2".
h
–