Operation
Hob cooking zone controls
Switching on
PowerFlex cooking area
Activating
24
Do not leave the appliance unattended when it is in use.
There are heat-sensitive electronics underneath the
display. Therefore do not place hot pans on the display.
Do not turn the rotary controls past "B" or "B I/II" to "0".
^ Turn the rotary control clockwise until the setting you want
appears in the display.
The PowerFlex cooking zones can be combined to form a
PowerFlex cooking area.
The PowerFlex cooking area is activated using the control for
the rear cooking zone.
Settings for the cooking area are controlled by the front
cooking zone.
If a power level was set for the front cooking zone when
activating the cooking area, the rotary control for the cooking
zone must first be turned to "0" before the power level can be
set for the PowerFlex cooking area.
^ Turn the rotary control for the rear cooking zone clockwise
to y.
A œ will appear in the display for the rear cooking zone.
^ Turn the rotary control for the front cooking zone clockwise
until the setting you want appears in the display.