Unit Description; Specifications - Shindaiwa T350 Owner's/Operator's Manual

Unit Description

Using the accompanying illustrations
as a guide, familiarize yourself with this
unit and its various components. Un-
derstanding this unit helps ensure top
performance, long service life, and safer
operation.
IMPORTANT!
The terms "left," "left-hand," and "LH":
"right," "right-hand," and "RH"; "front"
and "rear" refer to directions as viewed
by the operator during normal operation
of this product.
Specifications
Engine Model ...........................................................S350 Engine
Dry Weight C350 ........................................... 16.8 pounds/7.6kg
Dry Weight T350 ........................................ 15.2 pounds/6.9 kg.
Type ......................................................................2-cycle, vertical
Bore x Stroke ........................................................36mm x 33mm
Displacement ................................................... 33.6.cc/2.1 cu. in.
Maximum Power Output ............... 1.8 hp @ 7500 RPM (min
Operating RPM Range ......................... 5500–8500 RPM (min
Transmission Type ...................... Automatic centrifugal clutch
Fuel/Oil Ratio ............................. 50:1 with Shindaiwa Premium
Specifications subject to change without notice
Prior to Assembly
Before assembling this product, please
make sure you have all the components
required for a complete unit:
 Engine assembly (Powerhead).
 Outer Tube Assembly.
 Cutting Attachment shield.
 Cutting attachment (trimmer head or
brushcutter blade).
6
Gearcase
Trimmer Head
Gearcase
Brushcutter Blade
Figure 4
Fuel Tank Capacity, T350 ....................................34 oz./1000 ml
Fuel Tank Capacity, C350 ....................................34 oz./1000 ml
Carburetion ................................................. TK, Diaphragm type
Ignition ........................... Fully electronic, transistor controlled
cylinder, air-cooled
Spark Plug ............................................................ Champion CJ-8
Air Cleaner .............................................................Foam element
Starting Method ..................................................................Recoil
)
-1
Stopping Method .......................... Slide switch, grounding type
)
-1
Handle .............................. Loop handle with barrier bar (T350)
through bevel gears
2-cycle mixing oil
 Correct operator handle for applica-
tion (see preceding 87).
 Tool kit including: Hex wrenches and
a combination spark plug wrench/
screwdriver.
Carefully inspect all components for
damage.
Handle
Ignition
Switch
Outer Tube
Barrier Bar
Cutting
Attachment
Shield
Ignition
Switch
Hanger
Throttle Trigger
Outer Tube
Cutting
Attachment
Shield
WARNING!
Do not make unauthorized modifica-
tions or alterations to this unit or its
components.
T350 Grass Trimmer
Grip
35001
Fuel
Tank
Throttle Trigger
Hanger
C350 Brushcutter
Cylinder
Cover
Fuel
35002b
Tank
Handlebar
Handlebar (C350)