Attaching Or Removing The Stand - Sceptre E325BV-HDU Manual

Attaching or Removing the Stand

1. Place the display unit flat on a table. Afterwards attach the plastic base
onto the neck by form fitting the circular hole. Remember the plastic base
should have more area facing the front of the neck. Fit the metal plate
onto the bottom of the base by matching the 3 holes. Screw in the 4 thick
threaded screws to secure the metal plate to the plastic base. The
stand installation is now complete.
To install or remove the stand, screw in or remove the 4 screws indicated
in the picture and the stand will come off.
- 8 -
www.SCEPTRE.com
SCEPTRE E325BV-HDU User Manual