Hitachi 50V500 Operating Manual page 35

PICTURE-IN-PICTURE (PIP)
SPLIT MODE PICTURE-IN-PICTURE
Split Mode PIP displays the main picture and sub-picture evenly on the screen.
SWAP button (with PIP ON)
Press this button to toggle between the Main and Sub picture which is highlighted with a green border around the picture. Picture
sound and channel can be controlled when it is highlighted.
SPLIT
NOTE: The SWAP button will only operate in POP/PIP/SPLIT PIP mode.
PIP MODE button
To change between the available PIP modes (moving picture - SPLIT, POP or PIP; freeze picture - SPLIT, STROBE, MAIN and
SUB) press the PIP MODE button when PIP is ON. Each press of this button will change PIP to a different mode. Pressing
this button two times will cycle through both PIP modes.
a) Moving Picture
PIP MODE
b) Freeze Picture
PIP MODE
Freeze
Main Picture
PIP MODE
4
Freeze
SWAP
NOTE: PIP modes will depend on the type of signal format
received.
PIP MODE
Freeze
NTSC (ANT A/B)
480i
480p
720p
1080i
NOTE: Freeze modes will depend on the type of signal
format received.
35
Sub Picture
PICTURE-IN-PICTURE (PIP) MODES
POP PIP
NTSC (ANT A/B)
YES x
480i
YES x
480p
x x
720p
x x
1080i
x YES
Freeze
PIP MODE
Freeze
Freeze
FREEZE MODES
POP PIP SPLIT STROBE
YES x YES
YES x YES
x x YES
x x YES
x YES YES
SPLIT
YES
YES
YES
YES
YES
YES
YES
X
X
X