Hitachi 50V500 Operating Manual page 30

AV NET LEARNING WIZARD
This function of the AV NET makes it more expandable because it allows the user to use equipment that is not supported by the
pre-code library, listed on page 22. For example, after programming your equipment to the AV NET and the soft keys do not work,
the user just has to follow the steps below. The AV NET Learning Wizard will transfer any remote button IR code of your equip-
ment to the soft keys of your AV NET. If all remote button transfers are successful, the user can now control their equipment by
using the TV remote control.
HITACHI AV NET WIZARD (Learning)
C
Use this wizard to manually learn
or modify your AV NET soft keys.
BACK Learn Modify
Move
Start Wizard
SEL
THUMB
STICK
Learn
SELECT
HITACHI AV NET WIZARD (Learning)
A device is stored in memory.
To learn a new device AV Net will
replace the current device.
BACK
BACK Add New Device
Move Initialize
SEL
THUMB
STICK
Add New
Device
SELECT
HITACHI AV NET WIZARD (Learning)
Which device do you want to add?
(•) DVD2
( ) VCR2
BACK
( ) STB2
( ) CBL2
( ) PVR2
BACK NEXT
Move Next Step
SEL
THUMB
STICK
Next
SELECT
HITACHI AV NET WIZARD (Learning)
Select the DVD2 softkey to learn?
TV Softkeys
BACK
POWER
MENU
BACK
Move Select
SEL
THUMB
STICK
Select
Softkey
SELECT
HITACHI AV NET WIZARD (Learning)
Press and hold desired button to
transfer the command to AV NET.
Please wait while AV NET
Learns the command...
Yes
HITACHI AV NET WIZARD (Learning)
BACK
Transfer was successfull
Press OK to continue.
BACK OK
Move Select
SEL
THUMB
STICK
OK
SELECT
HITACHI AV NET WIZARD (Learning)
Select another DVD2 softkey to learn?
TV Softkeys
POWER
Continue
MENU
Done Continue
Move Select
SEL
NOTE: It is very important to point the equipment's remote control directly to the LEARNING AV NET sensor located on the TV
screen (see page 7) while trying to transfer the desired remote control button to the AV NET.
Highlight CUSTOM, and THUMBSTICK
to make changes on equipment already stored in the CUSTOM memory.
This page will not appear at initial set up.
Select the device (equipment) to be added for soft key learning.
Select soft key to be learned.
SELECT EXIT
HITACHI AV NET WIZARD (Learning)
No
Transfer not completed!
Try again?
NO YES
Move
SEL
HITACHI AV NET WIZARD (Learning)
DVD2 (Custom)
Done
Video Input
Audio Input
THUMB
Transmission Test POWER PLAY CH UP
STICK
SELECT EXIT
BACK OK
SELECT
Move
Select
SEL
BACK
HOW TO USE THE REMOTE TO
CONTROL YOUR LCD REAR PTV
to enter AV NET WIZARD. Select MODIFY
NOTE: To access the cursor function of a
Yes
Select
Set Top Box
DVD2
No
Move
HITACHI AV NET SETTING LIST
Device
DVD
VCR
CBL
STB
PVR
No Connection
AVR
OK
No Connection DVD2
THUMB
STICK
EXIT
SEL
EXIT
SELECT
30
specific equipment (Ex. DVD),
select the "MENU" soft key on
OSD, and press the MENU button
of the Projection TV remote con-
trol. In order to use THUMB-
STICK and EXIT button of the
LCD TV remote control, "arrows,
select, and EXIT" button must be
learned. Then the menu of the
programmed equipment can be
controlled with the LCD TV
remote control.
POWER MENU
Device Setting
INFO
THUMB
STICK
SELECT
Code Video Audio
0672 INPUT 1 Using TV
---- Not Setup Not Setup
---- Not Setup Not Setup
---- Not Setup Not Setup
---- Not Setup Not Setup
---- Not Setup Not Setup
---- Not Setup Not Setup
Select