Rear Panel; Hardware Setup - MSI H6Ma-P35 (B3) User Manual

ReaR PaneL

the rear panel provides the following connectors:
PS/2 mouse
PS/2 keyboard Serial port
iMPoRtant
* to reach the 8-channel sound effect, the 7th and 8th channels must be output
from front panel.
the VGa port only work with integrated Graphics Processor.
*

HaRdWaRe SetuP

this section provides instructions on CPu and memory installation, as well as
jumper settings on the mainboard. While doing the installation, be careful in hold-
ing the components and follow the installation procedures.
CPu & Cooler installation Procedures for LGa55
When you are installing the CPu, make sure that you install the cooler to prevent
overheating. if you do not have the CPu cooler, consult your dealer before turning
on the computer.
introduction to LGa 55 CPu
the surface of LGa 55 CPu. Remember to apply some thermal paste on it for
better heat dispersion.
alignment key
Parallel port
VGa port
uSB 2.0 ports
or uSB 3.0 ports
yellow triangle is the Pin  indicator
Lan
uSB 2.0 ports
alignment key
MS-7680
Line-in
Line-out
MiC
3