Windows 2000 - Linksys WMP300N Quick Installation Manual

Windows 2000

A
If the Digital Signature Not
Found screen appears,
click Yes.
B
Click Next and power off
your PC. After installing the
Adapter and restarting your
PC, the Setup Wizard will
continue.
C
Open your PC case and
locate an available PCI slot
on the motherboard.
D
Slide the Adapter into the
PCI slot. Make sure that all of
its pins are touching the
slot's contacts. Secure its
fastening tab to your PC's
chassis with a mounting
screw. Then close your PC.
E
Connect the antenna
stand's cables to the PCI
card of the Adapter. Plug
the cable with the blue
connector into the blue
CENTER ANT port. Then
attach the remaining
cables to the other ports.
F
Power on your desktop PC.
G
If the Digital Signature Not
Found screen appears,
click Yes.
Proceed to Step 3.
A
B
G
5