Hitachi 42V52 Operating Manual page 59

SETUP
Set The Inputs Use this feature to give a name to any of the five video inputs.
Setup
Menu Preference
Screen Saver
Set The Inputs
Set Black Side Panel
Set Closed Captions
Set Monitor Out
Set AV Control
Select
Move SEL
Use the CURSOR buttons to highlight the name of the video inputs.
Press the SELECT button to select desired input name.
Select Reset to set video names to original factory preset condition.
Use this function to automatically turn the TV on and tune to Video2 when it detects a video signal to input 2.
Video 2 Auto Link
Setup
Set The Inputs
Video1
Rename List
Video2
AVR
Video3
CAM
Video4
CBL
Video5 CBL2
RESET
Move SEL Return
Use the CURSOR buttons, then press the SELECT button to change Auto Link setting.
When Auto is selected, the TV will turn on and tune to Video2 automatically, when the Video2 input device is turned on. This is con-
venient when you want to watch a movie with your VCR, laserdisc player, or DVD player.
When Remote is selected, the TV will turn on and switch to Video2 automatically when the Video2 input device is turned on and the
VCR, laserdisc, or DVD play button on your remote control is pressed.
This is convenient when you want to record a movie with your VCR and watch it later.
Select Off to disable this function.
Press EXIT to quit the menu or select SET THE INPUTS to return to the previous menu.
NOTES: 1. Once the TV has been turned on using the Auto Link feature, it must be reset before Auto Link is used again. To do this,
turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and will turn on your TV as described above.
2. When using Remote mode, any remote control button will substitute for your video input device play button. However,
intended operation is for use with your VCR, laserdisc, or DVD play button.
3. If no remote control button is pressed after the TV is turned on by Auto Link, the TV will automatically turn off after
three hours.
Set Black Side The Black Side Panel function turns the gray side bars on/off when watching 4:3 signals in Standard
mode. The top/bottom gray bar will appear in SPLIT MODE PIP and SPLIT FREEZE.
Panel
Set Black Side Panel
Next/Prev
Use CURSOR button or
DVD PVR STB2
DVD2 PVR2 VCR
DVD3 SAT VCR2
LD STB VCR3
Off
On/Off Return
SEL
to set to ON or OFF.
Setup
Set The Inputs
Video1 Rename List
Video2 AVR DVD
Video3 CAM DVD2
Video4 CBL DVD3
or
Video5 CBL2 LD
RESET
Move SEL Return
Setup
Set The Inputs
Video1 Rename List
Video2 AVR
Video3 CAM
Video4 CBL
Video5 CBL2
RESET
Auto Link
Auto
Move SEL Return
Set Black Side Panel
Next/Prev
59
PVR STB2
PVR2 VCR
SAT VCR2
STB VCR3
DVD
DVD PVR STB2
DVD2 PVR2 VCR
DVD3 SAT VCR2
LD STB VCR3
Remote Off
On
On/Off Return
SEL