On-Screen Display - Hitachi 42V52 Operating Manual

PICTURE-IN-PICTURE button
See separate section on pages 26-28 for a description.
MENU button
The MENU button will start the On-Screen Display.
GUIDE button [Cable Box (CBL), Satellite Receiver (SAT)/Set-Top-Box (STB) mode only]
The use of this button is only applicable when the remote control is in (CBL) and (SAT/STB) mode. Press this button to access the
Channel Guide of the (CBL), and (SAT/STB).
EXIT button
This button will exit all On-Screen Displays.
CURSOR buttons/SELECT button
All the On-Screen Display features can be set or adjusted by using the CURSOR buttons and the SELECT button, except for
numeric entries. Press the CURSOR buttons toward desired direction and press the SELECT button to select.
INFO button
Press this button when you want to check the channel being received, the picture source, if the channel has stereo (ST) or second
audio program (SAP), the time, CHANNEL ID and if the TIMER is set.
INFO
Closed
Captioning
Day/Night
Day
Mode
CC
--:-- AM
View
Event Timer
INFO
INFO
NOTES: 1. The Sleep Timer info will show momentarily after releasing INFO button.
2. Press the INFO button again or the EXIT button to return to normal viewing.
3:32 PM
Ant A 22
ST Stereo
R
Off HD 1080i 4:3 Expanded
--:-- PM
3:32 PM
S-IN: 3
When an S-VIDEO
VID 3
Input is connected to
VIDEO: 3.
3:32 PM
YPBPR: 1
When a COMPONENT
VID 1
VIDEO: Y-P B P R Input is
connected to
VIDEO: 1.
HOW TO USE THE REMOTE TO
CONTROL YOUR LCD REAR PTV
Time
Main Picture Source
Audio Broadcast
Broadcast Rating
Aspect
Mode
24