Hitachi 42V52 Operating Manual page 45

CHANNEL MANAGER
Auto Channel Scan
Chan. Manager
Ant. A
Channel Source
Antenna
Auto Channel Scan
Channel List
Move Select
SEL
Chan. Manager
Ant. A
Auto Channel Scan
Scanning Channel Number: 66
Cancel
SEL
If the EXIT button is pressed while AUTO CHANNEL SCAN function is engaged, programming will stop. If two antennas are
connected, switch antenna inputs and repeat AUTO CHANNEL SCAN for the second antenna input.
Remember to select the correct ANTENNA/CABLE mode before using AUTO CHANNEL SCAN.
See CHANNEL MANAGER - SCAN to add or to bypass additional channels.
This feature will automatically store active TV channels in Auto Channel Memory. This will allow you to
skip unused channels when using CHANNEL UP ( ) or DOWN ( ).
Cable(1) Cable(2)
Start
Cancel
Chan. Manager
Ant. A
Channel Source
Antenna
Auto Channel Scan
Channel List
Move Select
SEL
45
Cable(1) Cable(2)
Start