Table of Contents
Advertisement
To access your USB device:
On Windows systems, use any of these methods:
Select Start > Run and enter \\readyshare in the dialog box.
•
Click OK.
•
Open a browser and enter \\readyshare in the address bar.
•
Open My Network Places and enter \\readyshare in the address
bar.
On Mac systems, follow this procedure:
1.
Select Go > Connect to Server.
2.
Enter smb://readyshare as the server address.
3.
Click Connect.
Other Features
For more features, including Live Parental Controls, traffic metering,
ReadySHARE, guest access, and more, log in to your router at
http://routerlogin.net.
© 2012 NETGEAR, Inc. All rights reserved.
No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any form or by
any means without the written permission of NETGEAR, Inc.
DO NOT stack equipment, or place equipment in tight spaces or in drawers.
Be sure that your equipment is surrounded by at least 2 inches (5 cm) of air
space.
Trademarks
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks
and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the
United States and/or other countries. Information is subject to change without
notice. Other brand and product names are registered trademarks or
trademarks of their respective holders. © 2012 NETGEAR, Inc. All rights
reserved.
12
Hide quick links:
Advertisement
Table of Contents
